Got a chance to test drive another retro twin fin fish (Circa 70). I really like these retro boards! 5’9 x 20″ 1/2 x 2″ 3/8. The Circa featured beautiful wooden glass on keel fins and a top notch acid splash foamie and pigmented resin job. Visually, this board was easy on the eyes and looked like it would fly. For those that don’t know the North Shore’s Kent Senatore of TORE Surfboards, he produces each board himself from start to finish from shaping the raw blank to putting the final layer of resin and gloss polishing the board.

Kent’s one of the few shapers that still produce the entire board himself…most of the shapers today farm the glassing (and sometimes shaping!) out to glassers and ghost shapers. Who’d a thought…you decide to spend big bucks on a Merrick or Tokoro board and chances are they didn’t even shape the darn thing themselves. Anyway, you won’t have that problem with Kent.

I managed to ride this board a number of times this summer on Oahu’s South Shore and it was a good thing I had this twin fin fish because the surf has been pretty dismal the past few months. Even though the surf had been small for a long time, this board proved its worth in non-ideal conditions. The flat fish rocker combined with sufficient width and thickness gave me plenty of paddling power to get into the smallest waves and flat/mushy sections were no problem. Once this board gets on the wave you can pretty much go around all the dead spots and surf the wave like your longboard. Add a few pumps in there and you can throw some tail around on gutless days.

The Circa 70 leans on feeling a little more like a thruster than some of the other fishes I’ve tried in the past. While other twin fins are way too loose lack drive, this board gives you more than enough looseness to pump and hit lips with great drive and down the line speed. If you want a surfboard that can catch a ton of waves yet still perform maneuvers, the Circa 70 is the type of board you need to try. This board is definitely a winner in small/slow surf/crowded days but can also work well on overhead swells too.

I just tested out this brand spanking new Kimo Greene Quad Fin Fish. This board measures 5’10 x 20.5″ x 3″. Yes, this board is beefy, especially for someone of my size! The interesting aspect of this board (besides the cool marble swirl) is the quad fin setup on a retro design. I’m sure you can tell by the picture that this board features a super wide fish tail and very full outline. I’ve seen most quad fin setups used on high performance boards like shortboards and performance fishes but haven’t seen a whole number of them on retro boards.

Took this board out for a test drive at one of my local spots and on my first wave, I noticed this board was INSANELY loose! I’ve never been a fan a extremely loose boards and have always preferred a little more drive. Long story short, I ended up switching the quad fins out and replacing them with a Future set that included 5.5″ front fins and 3.5″ trailing fins. At first it seemed like a lot of fin but this board has a lot of foam.

The next day I took the quad fin fish out for a spin again and a huge difference! The board had all the drive in the world and more than enough turning ability. Stoked! I’ve found that this board works great as a longboard replacement. I have this notion that longboarding makes me lazy and fat which is why I always try to stick with small boards. The extra thickness and width provides enough paddling power to hog a fair share of waves though we recommend that you share with your fellow surfers! Longboarding is fun but there are times when you just want to throw your tail around a little faster. This Kimo Greene Quad Fish is the perfect match for those longboard days when you really want to shortboard.

Comments

This retro fish rides extremely different from the other quads I’ve ridden. While most quad fin setups on high performance boards feel extremely loose, the quad fins on a wide and thick retro board make it ride more like a thruster. I’m assuming the super wide tail has something to do with this but perhaps if it wasn’t for the quad set, this board wouldn’t turn as well? A good board for gutless waves.

Saw Chad from Walk Fantastic in the water with a sick looking longboard. He let me try the Walk Fantastic 9’2 Retro noserider he personally shaped for himself. The board measured 9’2 x 23″ 1/4 x 2″7/8, 50/50 rails, reverse vee in the nose, wood block in the tail, and beautiful paint job. This single fin noserider reminded me of the noseriders you normally find in California and its super flat entry rocker made paddling and wave catching effortless. The board has an extremely blunt nose and wide square tail typical of the boards from the old days and the one aspect I liked about this board was its thinner nose which gave the board a sleek look offering better noseriding control.

I never had a chance to noseride thiseoard due to the short wave length on this day but I imagine you can easily hang ten on it. I’ll write more about this board the next time I bump into the Walk Fantastic guys. If you’re looking for a retro/Cali style longboard, this one is a sure thing.

I tested my friend Bruce’s 9’4 Joel Tudor Classic Pin. The board measured 9’4 x 22.125″ x 3.125″ with slight concave under the nose, smooth 50/50 rails, and 10″ classic fin. This was the first time I’ve ridden one of these ‘Cali-type’ longboards with it’s ultra flat rocker and even rails. Hawaii doesn’t really have slow point break style waves like those found in CA and because our waves are often shorter, steeper, and packed with more punch, our longboards tend to utilize a lot more nose and tail rocker to keep from pearling and provide quicker turning ability. The Tudor Classic Pin provided excellent paddling power and its wave catching ability was effortless. The overall flatter deck and rocker combined with soft rails proved to be something that I’ll need to get used to but I did manage a few smooth and arcing turns.

Unfortunately, due to the poor shape of wave faces today, I wasn’t able to noseride this board. However, I’ll get a chance to ride the Classic Pin a few more times soon and report on its nose riding ability. Stay tuned for the update.

While taking a look at Firewire Surfboards, I also noticed Surtech’s new TL2 skinned surfboards. The intriguing aspect of these boards was that they looked and felt like a traditional fiberglass board. My gripe with Surftech boards has always been that they feel extremely stiff and dead. The company has been promoting the TL2 skin as their next advancement in epoxy technology which offers performance improving flex.

Technology

Each board features a Techlite blank which is hand finished. The board is then vacuum bagged where it is wrapped in epoxy, fiberglass, and Acrylite which ensures a superior glass job. The Acrylite provides durability while providing ‘Variable Flex Engineering’ which the company claims to produce “desired flex and drive.” The boards are then processed by finishing shapers for last minute fine tuning and then glassed with clear epoxy glass and hot coated.

What separates the new TL2 boards from the older Tuflite surfboards is that TL2 boards go through the scrutiny of a hand shaper where as the Tuflite boards were mass produced pop outs. I couldn’t believe how different the new TL2 boards felt and if they do provide greater flex and drive, these boards could prove to be a great improvement over the Tuflite boards of old. These boards only appear to be available in an off white color…a big change from the colorful epoxy boards of the past.

We will be testing a bunch of Surftech boards including TL2 boards in the new future…our Hawaii Surftech rep has been cool enough to hook it up. Read our Surftech reviews.

Buy Surftech TL2 Online

View all Surftech TL2

Buy Surftech Shortboards

Buy Surftech Longboards

Firewire Surfboards have finally hit Hawaii surf shops and the hype has been building. These boards have a Rolls Royce like price tag at over $700 a pop…I went into Hawaiian Island Creations and saw boards selling for $800! There’s been so much hype surrounding these boards and all I’ve been hearing is how Taj Burrow claims these boards are insane. For the steep price tag, I hope he’s right.

Firewire Technology

Firewire Surfboards feature their ‘Future Shapes Technology’ which produces flex memory and rapid rebound. Most of the hype surrounding these boards lie in the rails which utilize a parabolic balsa wood rail (not new technology). These boards have no center stringer and according to Firewire Surfboards, the wood rails flex and store energy (compress) throughout the turn and spring back to the original rocker (decompress) thereby releasing the energy in the form of speed which triggers rapid acceleration. All Firewire Surfboards are made with epoxy resin which ensures that these boards maintain their long lasting flex patterns unlike traditional fiberglass boards which lose their flex as they age.

Customization

While the majority of these stock surfboards are sold off the rack, the company’s website states that Firewire boards with custom dimensions can be ordered. However, I would expect the custom boards to take quite a while to get back to you.

Durability

One thing I noticed while looking at Firewire boards was that they lacked thickness. The company claims that their epoxy/composite surfboards are up to 20% lighter than traditional fiberglass surfboards which is why they can offer a shorter and thinner board. However, these boards last 5-10 times longer than tradition PU boards and the composite materials ensure that these boards do not loose their flex and ‘liveliness’.

Models

Flexfire – Standard shortboard outline with performance in mind and is designed for maximum speed and quick turning. The website claims “Flexfire series explodes through turns while the parabolic rail configuration guarantees 100% return memory for years.”

Alternator – Slightly more forgiving shortboard outline geared for the intermediate surfer designed to paddle well but still turn in a tight radius. Probably the most all around shortboard shape for average to intermediate surfers.

Quadraflex – Combines the control of the Alternator with the speed of a twin fin fish. This board basically looks like a shortboard with a wider swallow tail…board also features quad fin setup. This is Firewire Surfboard’s stab at the increasingly popular quad fin surfboard.

Futura – Somewhat of a modern fish outline and design. High top-end speed with tight turning ability in a thruster fin setup.

Fishtail – Retro twin fin fish design and in my opinion the most fun looking board in the Firewire quiver. Old school design meets new school composite materials and construction. A twin fin fish with parabolic rails means the fastest fish ever built? I find it hard to believe but if you see the regulars at your spot running circles around you with this board, the myth must be true.

Skeptic

I’m somewhat skeptical that these boards really explode out of turns with a greater amount of speed than traditional surfboards. The one aspect that has me questioning the worth of these boards is their epoxy construction. I’ve yet to find an epoxy surfboard that has really worked well in choppy, windy, or sub-par conditions. The company claims that these boards perform well in windy conditions but I’ll let you be the judge.

Perhaps the local rep here may let us test drive a few boards. We’ll let you know as soon as we ride one of these boards. Stay tuned for our conclusion.

Dimensions: 9’0 x 22″ 1/2 x 3″

Last week we test drove Kimo Greene’s most popular longboard model, the Honolulu. The standard normal Honolulu model is a high performance longboard designed for off the lips and hard turns. Instead, we tested a Honolulu model crowd control board in hopes that we could catch a ton of waves and do a few hard turns as well. The board we tested had a slightly wider nose, flatter rocker, and a little more foam left on the deck for improved paddling and wave catching ability.

We were very surprised to find that not only did this board catch any wave we wanted, it also turned incredibly well for a thicker/wider tanker. It was somewhat easy to pump down the line and floaters over sections were not a problem. The Honolulu model comes with a 2+1 box and O’Fishl fin set up but we rode it as a single. Round house cutbacks were not a problem and while we normally prefer 2+1 or thruster setups, this particular single fin was extremely fun. The extra wide nose and flatter rocker also made nose riding quite easy.

Read more…

Dimensions: 5’9″ x 2″ 3/8 x 19″ 1/2

We tested this 5’9 TORE Rocket Fish from TORE Surfboards Hawaii in some fun but weak surf. This PU board definitely looked thinner and cleaner than some of the other clunky hybrid fishes being sold off the rack. However, the 19″ 1/2 width provided more than adequate paddling power. This Rocket fish came equiped with low entry rocker, double barrel system, and an FCS thruster set up. Surprisingly, it provided the best of both worlds; the ability to paddle and catch waves with ease but extremely agile and responsive pumping down the line, drawing out smooth round house cutbacks, and re-entries. The best thing about this board was how much speed you could gain in weak surf…it flies.

This board worked extremely well in gutless surf and it was easy to pump through dead sections and gain enough speed to power a nice cutback at the end. The double barrel system provided tremendous drive and projection off the bottom and out of turns.

Pros: Speed, speed, and more speed. Very good paddling power and very workable off the bottom, off turns and cutbacks, and pumping down the line. We couldn’t believe how smooth this board felt and how responsive it was. If you’re looking for a board that works extremely well in a variety of conditions from gutless surf to workable overhead walls, we highly recommend this board. This board will replace your hybrid/small wave board. Give Kent a call, he’ll help shape your new custom surfboard.
Cons: None

Get it: www.toresurfboards.com

Dimensions: 6’1″ x 2″ 1/4 x 19″ 1/4

Bought this board a while ago during the first epoxy hype. Purchased it brand new for over $600 because it sounded like it was really gonna perform well. Probably the worst board I have ever ridden. The board paddled extremely well and very floaty, but it was just way too light to have any kind of performance on the wave. From my experience, most epoxy boards only work well in clean conditions but this particular M10 did not work in any condition. It almost seemed like you were literally surfing a plastic toy instead of a high performance surfboard. I gave this board more than a few months to live up to my expectations but it disappointed. My criticism for this board is that it never felt like the rail engaged in the wave…almost as though it was skimming the surface the whole time. I went back to my PU board after the M10’s trial run and felt such a huge difference. The PU board felt so much more responsive and solid in the wave. I hear that Surftech has a new type of skin now called the SL2 which is supposed to have better flex patterns. We’ll see if those boards are any good. This one certainly wasn’t.

Pros: Extremely light and very good paddling power

Cons: Bland paint job. Board felt too light…almost skimming the water and I never felt like I could bury the rail on my turns. These Surftech boards are extremely expensive. The one thing that really pissed me off was the fact that these boards weren’t as durable as they claimed. About a month after I bought the M10, I dropped it by accident about a foot off the ground while trying to put the board into its board bag. The paint on the rail chipped off and after that day, the paint continued to slowly chip off.

I would like to try some other models and see if I can provide positive feedback. Stay tuned…

Dimensions: 5’9 x 20 x 2″ 3/8

Twin fin fish shaped by Dave Parmenter (Makaha), wood veneer glassed with epoxy resin by Surfgear Hawaii. Originally tried this board with triple plug FCS wood keel fins. The board ended up being very unresponsive and slow. In an experiment, I installed a small trailer plug and tried the FCS MR twin fins instead. Performance changed dramatically and I could actually pump down the line with speed and turns felt loose but in control. Also tried the trailer fin (comes with MR’s) and made the board feel for like a thruster. I liked the trailer fin for slightly larger and punchy surf. In small surf, the twin fins were exceptional.

Pros: The epoxy glass job by Surfgear Hawaii makes this board nearly indestructible. I dropped this board by accident onto contrete while showering after a surf and no major damage done. I may have scratched it a bit but these boards are rock steady. These type of epoxy boards may be best for surfers who want their boards to last a long time and those that are very careless with their equipment (always banging it around). The other good thing about epoxy is that beacuse they float extremely well, you can get a slightly smaller board than what you normally ride (smaller board means better turning/maneuvering).

Cons: My experience with epoxy boards is that they work well in clean conditions. However, in choppier/windy surf, the board seems to skip on the surface and I feel less in control. I’ve yet to find an epoxy board that has worked well in windy/choppy surf. Epoxy works well in glassy conditions which don’t come often in Hawaii. You should also keep your epoxy board out of cars and in direct sunlight. Exposure to sun will delaminate and kill your board.